Stumped! Need advice ASAP please
Just bought another M96 from a friend of mine that's been sportered and i want to return it to original due to most everything on the barrel, receiver and action are all matching and unmolested. I...
View ArticleRe: Stumped! Need advice ASAP please
Heat is the best way to loosen Loctitie. Alcohol, Acetone or MEK might work to varrying degrees depending on what type (There actually is over 100) of Loctite it is.
View ArticleRe: Stumped! Need advice ASAP please
That is a tough one because of the wood. I don't know if putting screwdriver in the slot and hitting it with a hammer would 'shock' the threads loose............
View ArticleRe: Stumped! Need advice ASAP please
You might try applying an electric wood buring tool or soldering iron to the heads of the screws to generate enough heat to loosen the Loctite.
View ArticleRe: Stumped! Need advice ASAP please
guys, thanks for the input. Ive tried the electric wood burner/soldering iron, small torch(butane), but will try the screwdriver/hammer trick. This things in there and im losing my patience. Cant...
View ArticleRe: Stumped! Need advice ASAP please
Just a tip . 1st , you need the correct Gunsmith screw driver blade , not the common carpenters or mechanics screwdriver . These are called hollow ground blades . The other blades mentioned are...
View ArticleRe: Stumped! Need advice ASAP please
An impact driver should be a better tool than just a hammer and gunsmith screw driver. Just use a gunsmith quality bit in it. If that fails, as a last resort drill out the heads of the screw and...
View Article
More Pages to Explore .....